Opening a Takeaway: The Equipment Checklist

Commercial takeaway kitchen with stainless steel fryers, a chip dumper full of chips, a flat-top griller and an extraction canopy

A takeaway lives or dies on speed. When the lunchtime queue reaches the door, every customer is watching how fast the chips come out, how hot the food is and how long they wait. The right equipment makes that rush manageable. The wrong equipment, or too little of it, turns it into a bottleneck that sends customers to the shop down the road.

This checklist follows the food through a typical takeaway: storing, frying, grilling, holding hot, and serving. At each step we cover what to look for, so you can plan a kitchen that keeps up with your busiest hour, not just your quiet one.

1. Cold storage: where every order starts

Before anything is cooked, it has to be stored safely. Chips, patties, chicken, russians and sauces all need cold or frozen storage close to the fryers and grillers.

  • Upright freezers hold frozen chips, patties and portioned chicken, and keep the stock you use most within easy reach.
  • Upright coolers keep sauces, salads, cooldrinks and defrosting stock at a safe temperature.
  • Keep a little more capacity than you think you need. A fridge packed to the door struggles to hold temperature, especially in a hot South African kitchen next to a row of fryers.

See our fridges and freezers.

2. Frying: the engine of the takeaway

For most takeaways, the fryer is the most important machine in the shop. Chips, fish, chicken and vetkoek all depend on it.

  • Electric fryers are simple to install where you have the right power supply, and give good temperature control. They suit smaller shops and counters where gas is not practical.
  • Gas fryers heat up quickly and recover temperature fast after a full basket goes in, which matters when you are frying batch after batch at peak time. They also keep working during load-shedding, provided the gas supply and installation are in order.
  • Twin-pan fryers let you keep chips and fish or chicken apart, so flavours do not mix and you can run two products at once.

Size your fryers by your busiest hour, not your daily average. If you expect to fry chips non-stop over lunch, a fryer that needs time to recover after every basket will slow the whole line.

Compare our electric fryers and gas fryers.

3. The chip dumper: small machine, big difference

A chip dumper sits next to the fryer and keeps freshly fried chips warm and dry while you salt, portion and pack them. Without one, staff end up portioning straight from the basket or leaving chips on a tray to go cold and soggy.

With a chip dumper, you can fry ahead of the rush in sensible batches and serve hot chips as fast as customers order. Place it right beside the fryer so the basket moves straight from oil to dumper.

View our chip dumpers.

4. Grilling: burgers, steaks and toasted sandwiches

If your menu includes burgers, boerewors rolls, steaks or toasted sandwiches, you will need a grilling surface.

  • Flat-top grillers (griddles) cook patties, eggs, onions and toasted rolls on one smooth surface, and are easy to scrape clean between batches.
  • Gas grillers give fast, high heat and keep cooking through power outages where the gas installation allows.

Think about how many patties you need on the grill at once during the rush, and choose a cooking surface with room to spare.

See our flat-top grillers and gas grillers.

5. Holding food hot: bain-maries and warmers

Pies, chicken pieces, pap, stews and curries all need to be kept hot and ready to serve. A bain-marie holds cooked food in containers over heated water, so it stays hot without drying out as quickly. It also lets customers see what is available, which helps them order faster.

Choose a bain-marie by the number of pans you want to display and where it will stand: on the counter, or as a free-standing unit facing the customer.

Browse our bain-maries and the wider range of food warmers.

6. Extraction: the canopy above it all

Fryers and grillers produce heat, steam and grease-laden smoke. An extraction canopy draws that out of the kitchen, which keeps the space more comfortable for staff and helps keep grease off walls and ceilings.

The canopy should cover the full length of your cooking line, including the fryers and grillers. Whether you need a canopy, and what kind of ducting and fire protection go with it, can depend on your municipality, your building and your landlord, so check with them and a qualified installer before you finalise the layout.

See our extraction canopies.

7. Prep and cleaning

Stainless steel tables give you hygienic surfaces for cutting, crumbing and packing, and they stand up to daily cleaning. Put one between the cold storage and the fryers so food moves in one direction. A stainless steel sink keeps washing separate from food prep, and a grease trap helps stop fat from fryers and washing-up reaching the drains. Ask your municipality or plumber whether one is required at your premises.

View our stainless steel tables, sinks and grease traps.

Before you buy: a quick checklist

  • Power and gas: List the power each machine needs and whether it runs on single-phase or three-phase. Have an electrician confirm what your premises can supply, and use a registered gas installer for gas equipment.
  • Your busiest hour: Size fryers, grillers and the chip dumper for peak demand, not the daily average.
  • Layout: Plan the flow from freezer to prep table to fryer to chip dumper to counter, so staff are not crossing paths.
  • Load-shedding: Decide which equipment must keep running in an outage. Gas cooking can help, but fridges and freezers still need a plan. Size any backup power with a qualified installer.
  • Spares and after-sales: Fryers work hard every day. Ask who services them and how quickly you can get parts. Read why after-sales support matters.
  • True cost, not just price: A cheap fryer that is slow to recover or breaks often costs you sales. See our buyer’s guide.

Mistakes to avoid

  • Buying one small fryer and expecting it to handle a full lunchtime queue.
  • Leaving out the chip dumper, then serving cold or soggy chips.
  • Placing fryers and grillers where a canopy cannot be fitted.
  • Running out of freezer space and storing stock far from the cooking line.

Frequently asked questions

Should I choose a gas or electric fryer for my takeaway?

Both work well. Gas fryers heat quickly, recover fast between batches and can keep cooking during load-shedding if your gas installation is in order. Electric fryers are often simpler to install where you have the right power supply. Many takeaways use a mix of both.

What does a chip dumper do?

A chip dumper keeps freshly fried chips warm and dry while you salt and portion them. It lets you fry in batches ahead of the rush and serve hot chips quickly.

Do I need an extraction canopy?

If you fry or grill, a canopy helps remove heat, steam and grease from the kitchen. Requirements depend on your municipality, your building and your landlord, so check with them and a qualified installer before you buy.

Can I see takeaway equipment in Pretoria?

Yes. Contact Inacio Refrigeration CC at 572 Charlotte Maxeke Street, Pretoria West. Our team can talk you through the options and what will suit your shop.

Talk to Inacio Refrigeration CC

For more than 35 years Inacio Refrigeration CC has supplied new commercial refrigeration and catering equipment to takeaways, restaurants, butcheries, bakeries and shops across South Africa. Browse our catering equipment, or get in touch for advice and a quote:

  • WhatsApp: 067 022 0173
  • Phone: (012) 327-7295 / 327-7296
  • Email: inacios@mweb.co.za
  • Visit: 572 Charlotte Maxeke Street, Pretoria West